---
title: How to Change a MyTana Cable Reel
description: Learn how to change a MyTana cable reel quickly and easily with this simple walkthrough and video reference.
---

[MyTana Blog](https://blog.mytana.com)

# [How to Change a MyTana Cable Reel](https://blog.mytana.com/how-to-change-a-reel)

 Written by [MyTana](https://blog.mytana.com/author/mytana) | Aug 15, 2022, 12:22:00 PM

Drain lines come in a variety of sizes. Many plumbers and drain cleaners find themselves changing reels midday or even mid-job. While some manufacturers attach reels with brackets and screws, MyTana cable machines all come with quick-change drive springs. Following the steps below, you can change your reel in under two minutes with only a hex key tool.

## How to change a MyTana cable reel

1. **Detach** any blades, attachments, or leader cables.
2. If you have an **Autofeed**, remove it or push the cable through it.
3. Detach and remove the **revolving arm**. Use a hex key tool to loosen the set screws on the arm. *Models M81, M844 and M98 feature a J-lock spring arm, while the M661 and M888 use a standard revolving arm.*
4. Push cable through the revolving arm and back into the reel.
5. Unhook the **drive spring** from the cleat at the rear of the reel.
6. Slide the reel off the drive shaft and replace it with your **new reel**.
7. Attach the drive spring on the new reel to the cleat.
8. Feed the cable into the loose revolving arm until a few inches protrude and reinstall the arm. **Remember to tighten the set screws**.
9. Feed cable through Autofeed (if you didn’t already) and reattach it.
10. **Reattach** your blade, end tool, or leader.

With these simple steps, you can swap your cable and move forward with the job. To see the quick-change reel in action, check out our video of a cable-swap on the M661 and M81:

 

 

 

[View full post](https://blog.mytana.com/how-to-change-a-reel)

```json
{
  "@context" : "http://schema.org",
  "@type" : "BlogPosting",
  "author" : {
    "@type" : "Person",
    "name" : "MyTana"
  },
  "dateModified" : "2022-09-13T01:00:31.503Z",
  "datePublished" : "2022-08-15T12:22:00Z",
  "headline" : "How to Change a MyTana Cable Reel",
  "image" : {
    "@type" : "ImageObject",
    "height" : 1602,
    "url" : "https://cdn2.hubspot.net/hubfs/3857516/M888_Remove_Cleat.png",
    "width" : 2400
  },
  "mainEntityOfPage" : "https://blog.mytana.com/how-to-change-a-reel",
  "publisher" : {
    "@type" : "Organization",
    "logo" : {
      "@type" : "ImageObject",
      "height" : 60,
      "url" : "/hs/hsstatic/content_shared_assets/static-1.4092/img/default-amp-logo.png",
      "width" : 60
    },
    "name" : "MyTana Blog"
  }
}
```